- Steel Pipes[10]
- Copper Pipes[7]
- Iron Pipes[7]
- Ladder & Scaffolding Parts[1]
- Steel Angles[4]
- Flat Steel[2]
- Steel Wire[5]
- Iron Wire Mesh[1]
- Stainless Steel Wire[1]
- Contact Person : Ms. Ou Viola
- Company Name : Tianjin Zhongtian Haoyun International Trading Co., Ltd.
- Tel : 86-22-68576815
- Fax : 86-22-68588878
- Address : Tianjin,Tianjin,Baiyi Road, Daqiuzhuang Town,Jinghai County,Tianjin
- Country/Region : China
- Zip : 301606
6x24+7FC steel wire rope
6x24+7FC steel wire rope
1. Steel wire rope for important purpose suitable for minehoisting,hoister for blast
furnace,large casting,petroleum drilling,large hoisiting and lifting, ship and offshare facilities2.Characteristic: characterized with fatigue tolerance,anti-corrosion,small elongation,long life,safe and reliable operation\non-loose.For example steel wire rope for lifting and hositing in vertical well,fatigue tolerance,and anti-corrosion are mainly required.Package:
1.steel wire rope suppliend in coil
Roll and expand steel wire rope straight on ground. Ensure not be pollyted by dirt ,sand ,
humid or other harmful matters.Prohibit draeing steel wire rope from one static coil.because it
will cause twisting or snarling of steel wire rope.
In case steel wire rope coil is too large and it can't naturally rotate ,the steel wire rope
shall be place on a support which can freely rotate,so ateel wire rope can be drawn from
the end of the steel wire rope wire.Draw steel wire rope from coil.
2.steel wire rope supplied in wheel axle
Put one axle with sufficient strength through wheel axle whole,put the wheel axle on a
suitable support which can rotate,the support shall be equipped with a brake device
in order to protect against excessive rotation during installation. When multi-layer steel wire rope shall be wrapped,the wheel axle shall be place on a device
which can provide back tension to the steel wire rope,so the back tension can be transmitted
from the wheel axle to the roller. Then lower layer steel wire rope,in particularly the bottom layer
steel wire rope,can be tightly wrapped on the roller. Rope supplying axle wheel shall be installed
in a suitable positable position in order to keep deflection angle of the steel wire rope minimum
during installation.if ring loop occurs on steel wire rope,it is not allowed to drawn tightly in order to
avoid snarling of steel wire rope.
1. Components of steel wire rope
2.raw material
3.processing equipment
4. finished products
5.testing
6.workshop and package
7.usage
6x24+7FC steel wire rope
